Heat Pump Inspection Checklist

Heat Pump Inspection Checklist

Heat Pump Inspection Checklist Lewis Comfort Control

Like any other cooling and heating equipment, your heat pump system is vulnerable to performance degradation if it isn’t properly maintained. Breakdown of your heat pump can cost you thousands of dollars, which is the last thing you need.

Preventative heat pump services will keep it safe from technical failure and make it more efficient than furnaces, especially in regions of moderate climates.

It is possible to avoid a build-up of debris and dirt and withstand severe environmental conditions capable of compromising an outdoor heat pump unit by inspecting your system regularly. In addition, your heat pump’s efficiency will deteriorate if you don’t do regular preventative maintenance.

Here are some of the significant pointers you should have in your heat pump inspection checklist:

1. Switching Thermostat

Take the thermostat out of the “heat” seating. Switch your thermostat to “cool” mode, and your heat pump will take care of the rest; it’s probably easier than you think.

2. Adjusting Thermostat Temperature

You may want to make a change to the temperature on your thermostat. In most cases, you’ll utilize a different temperature setting for heating and cooling your home.

3. Cleaning the Outdoor Unit

Clear the space surrounding your heat pump’s outdoor unit in case of debris accumulation. Plant nothing within a few meters of your heat pump’s outdoor unit until you’ve cleaned it and removed any noticeable debris.

4. Condenser Cleaning

Rinse the condenser unit with water. Even though the cleaning of your condenser unit is sufficient during its tune-up, you may want to rinse it if there is dirt build-up. When the unit is in shut down mode, you can use a hose to clean the fins, but be careful not to apply too much water pressure, which could bend them.

5. Filter Replacement

Replace your air filter. Your heat pump will work more efficiently and protect itself from damage if you maintain the filter clean. You should replace your filter immediately if you haven’t done so in a while, and you should do so at least once each month during the winter season.

It would be best to conduct the heating and cooling equipment inspection and service individually, as recommended by HVAC manufacturers. This is because different heat pumps vary according to where they derive their heat source from. Checks should involve service and cleaning as part of comprehensive HVAC inspections.

With that in mind, fall is the best time of year to have your heating system inspected. A better period for cooling system maintenance would be in the spring. The goal is to get your heat pump ready for the forthcoming season’s fluctuating temperatures.

Are you seeking an excellent HVAC company for having your home’s heat pump system inspected? Lewis Comfort Control provides comprehensive heat pump services to its customers. We also provide reliable furnace repair, duct cleaning, and air conditioning services.

Contact us to secure one of the finest residential HVAC services in Nashville.